Amiga 500 / 500+
external Zorro-II adaptor. This adaptor allows you to connect a Zorro-II
device to the sidecar port of your Amiga 500 or 500+, allowing the use
of RAM cards, IDE controllers, SCSI controllers graphics cards and so
on. It is known to work with:
A2058 Zorro RAM cardA2091 RAM ..
Plugging the A500 into this adaptor card gives you new Amiga system the
following functions. ATX power adaptor and switch control, internal 86
ping original Zorro slot passthrough, a full A2000 compatible Zorro 2
slot and finally two fan header ports...
This service allows you to restore the correct functioning of your Commodore Amiga computer. The cost indicated refers to the research and identification of the problems and allows the creation of an accurate estimate for the actual repair...
Amiga kickstart ROM 3.2.2 ( 47.111 ) for Commodore Amiga 500 600 2000 CDTV.Allows you to start the Amiga with the latest released version of the operating system. To install the ROM you need to have a regular license for Amiga OS 3.2.2..
AMIGA Morphos Personal Computer based on Mac Mini A1103 2026 Hardware with PowerPC G4 CPU and MorphOS 3.18 operating system registered and activated with regular definitive license and therefore ready for any use. This little computer features a 1.25 GHz PowerPC 7447A (G4) processor with AltiVec "Ve..
Recent release of the Commodore Amiga 4000 desktop operating system with original ROMs to be installed on the computer. The operating system is distributed on CD together with the ROMs. It does not need any previous or pre-existing version, and can be installed both on emulated systems and on real c..
Alternative distribution of AROS by courtesy of AMIGASYSTEM:AROS one is characterized both by the introduction of new applications and by other significant improvements, among the new features is a correction of the "Cassette Icons" where AMIGASYSTEM has improved the appearance and added the classic..
Buddha is a top-class IDE controller for Amiga computers with Zorro slots. It has been for 27 years now, and the IDE interface remains relevant for backing up harddrives, using CD- and DVD drives (readers and writers), and CF cards, as a cost-effective way to replace an SSD.Buddha Plus One adds a fe..
With this module it is possible to replace the original buffer battery on Amiga computers with modern CR2032 ones. It has a diode to block the charge...
It is used to convert and transform a classic PATA IDE controller into two SATA ports and to permanently eliminate the annoying IDE plates, it can be installed on all IDE controllers starting from those present in the Amiga 4000 to those of the Vampire accelerator cards etc.. This small card solves ..
It is used to transform a classic IDE PATA controller into two SATA ports and definitively eliminate the annoying IDE cables, it can be installed on all IDE controllers starting from those present in the Amiga 4000 to those of the Vampire accelerator cards etc.. This little card solves many known pr..