Amiga Hardware

Recent release of the Commodore Amiga 4000 desktop operating system with original ROMs to be installed on the computer. The operating system is distributed on CD together with the ROMs. It does not need any previous or pre-existing version, and can be installed both on emulated systems and on real c..

With this module it is possible to replace the original buffer battery on Amiga computers with modern CR2032 ones. It has a diode to block the charge...

KickStart ROM for Amiga 4000 DeskTopCommodore originals as in photoVersion 3.0 Rev.: 39.106Used Object..

Semi / passive adapter for the RGB video port of all Amiga ComputersOriginal Commodore as in the photoAmiga 1000 500 600 1200 2000 3000 4000Object used..

Modulator for converting the video output signal of Amiga computers from RGB to RF (Modulation in Radio Frequency) and Low-frequency VideoComposite.Perfectly worked because testedIt does not require any external power supply because it is powered by the Amiga video portCompatible with all Commodore ..

This small module allows you to generate the Tick signal necessary for synchronizing the Amiga video signal. It can be installed on ATX power supplies from which it takes power (+5 Volt) to generate the tick signal to be injected into the appropriate pin of the Amiga mainboard...

Passive adapter for the RGB video port of all Amiga computersTransform the door from 23Pin to 15pin VGASelf-built but tested and fully functionalAmiga 1000 500 600 1200 2000 3000 4000Object used..

The card is fully compatible with Kickstart 2.0, while with the 3 and 3.1 it can only be used with the TVPaint software (Original with Hardware key) that I sell together with the card.Complete floppies with original management softwareInternal framebuffer typeit works like a genlock because it shows..