





The ROCK Pi is a small, compact personal computer with a modern, powerful ARM-based processor. Its CPU is a 6-core processor called RK3399 that offers significantly improved performance over many other CPUs in the same category. The Rock Pi like many other single motherboard computers is equipped with 3200Mb/s LPDDR4 RAM and optional high performance eMMC modules that enhance all applications. Expansion and interfacing options are plentiful and intuitive for developers, the most common of which is the 40-pin GPIO interface that enables interfacing with specially written software to exploit a variety of features such as switches, sensors, LEDs and more. ROCK Pi also has a GigaBit LAN for fast interfacing with LAN networks, with dedicated bus and controller, and operates without latency in heavy-duty network applications. Built-in 802.11 ac wifi offers 2.4G and 5G WLAN connectivity. With Bluetooh 5.0, ROCK Pi offers improved Bluetooth speed and longer range. ROCK Pi also has a USB 3.0 host and a USB 3.0 OTG port, each with 5 Gigabps/s, which work independently. OTG USB 3.0 can work as a USB device such as ADB Android or USB gadget. A hardware switch is provided to enable or disable OTG mode.
64bit processor hexa core Rockchip RK3399 Dual Cortex-A72, at 1.8Ghz with quad Cortex-A53, at 1.4Ghz
GPU Mali T860MP4 gpu, with support OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.
Memory LPDDR4@3200Mb/s, 1GB/2GB/4GB optional - 64bit dual channel LPDDR4@3200Mb/s, only with 4GB on board.
Storage with optional 8G/16G/32G/64G/128G high-performance eMMC module
uSD card slot with up to 128GM.2 NVME SSD with up to 2T support
HDMI Video Output Full size HDMI 2.0 up to 4k@60(Type A)
MIPI DSI 2 lanes on FPCHDMI connector and MIPI DSI can work simultaneously with support for mirroring or extension modes.
Audio 3.5mm jack with mic HD codec that supports up to 24-bit/96kHz audio.
2 lanes MIPI CSI 2 lanes camera via FPC connector, support up to 800MP camera
WIFI 802.11 ac and Bluetooth 5.0 with integrated antenna
USB 3.0 OTG x1 hardware switch for host/device switch, upper one
USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2
Gigabit Ethernet LAN with PoE support
40-pin IO expansion connector:
- 1 x UART
- 2 x SPI bus
- 2 x I2C bus
- 1 x PCM/I2S
- 1 x SPDIF
- 1 x PWM
- 1 x ADC
- 6 x GPIO
- 2 x 5V DC power in
- 2 x 3.3V power pin Other:RTC connector for system clock buffer battery (optional)Power supply via USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A with Qualcomm® Quick Charge™ holder with 9V/2A, 12V/1.5A QC3.0/2.0 aminetors Dimensions 85mm x 54mm
Assembled in dedicated aluminium cabinet with integrated heat sink as in photo
Shipping costs are charged only once for all the products you wish to purchase and which are in your shopping cart. The more products in your shopping cart, the greater the saving on shipping costs because they are calculated as a lump sum and not added together. It is not always necessary to use the shipping method, in fact you can collect your purchases as summarised below:
The shipping methods available are as follows:
Shipping to Italy or abroad with price depending on the destination (See table costs)
No shipping required because you have chosen to pick up on site or because in the cart you have also put a technical support service on site, in this case the shipping costs are zero since the products will be delivered by the technician who will also provide the support purchased.
For details of shipping costs take note of the weight volume expressed in VKG from the product page and click here to visit the page with all prices.
During the month of August all shipments may be subject to substantial delays due to the summer working week period.